Temporary & Permanently IMEI Fix For Micromax Unite 2 A106 & Any Other MediaTek Device

1 comment



NOTE - I Will Not Be Responsible if Your Device will brick after using this method
It's tested only on Micromax Unite 2 A106

What You Need

> Your Device (Mobile)

> MediaTek Drivers DOWNLOAD HERE

> SP FLASH TOOL DOWNLOAD HERE

> STOCK FIRMWARE DOWNLOAD HERE
(v1 For 4GB Model, v2 For 8GB Model & v3 For Both 4GB & 8GB)

NOTE - This Firmware is only for Micromax unite 2 A106 if u r using any other MediaTek device then don't use this Firmware)

> Maui META 3G Tool DOWNLOAD HERE
   (For Permanent Fix)

> Chamelephon DOWNLOAD HERE 
   (For Temporary fix)


NOW LETS START THE STEPS TO FIX THIS IMEI PROBLEM

1 - Install MediaTek Drivers (skip this step if u have already installed)

2 - Extract Firmware In A Folder

3 - Extract Sp Flash Tool And Open Flash Tool

4 - Now Click On Scatter loading button & load scatter file from Firmware folder

5 - Choose Format + Download

6 - Now Click On DOWNLOAD And flash will start when flashing will complete a green tick ✅ will appear
Now Switch On your Device

Hurre u have successfully flashed stock rom now lets fix the IMEI

STEPS TO FIX IMEI TEMPORARY

1 - DOWNLOAD Chamelephon From Above "What You Need Section" or from play store

2 - Open Chamelephon & Write Your Both IMEI one by one

3 - Click On Apply And Reboot

Done.

STEPS TO FIX IMEI PERMANENTLY

1 - DOWNLOAD & Install "Maui META 3G Tool" on your PC

2 - Open it.

3 - Click "Options ↦ Connect Smart phone into META mode"

4 - Click on Reconnect button

5 - Switch off your phone

6 - Connect via USB Cable

7 - Change "Get Version" to "IMEI Download"

8 - CLICK HERE TO DOWNLOAD NVRAM DATABASE FILES

9 - Click "Change NVRAM Database file"

10 - Download & extract "NV Ram Database Files.rar"

11 - Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_ MD_WG_MP_V5_1_wg_n"

12 - Type both IMEI numbers

13 - Click "Download to flash"

14  - Click "Upload from flash"

15 - Close the IMEI Download Tab

16 - Disconnect

17 - Switch on the phone.

Done Now Enjoy with your Device

NOTE - This Method Is Tested Only On Micromax Unite 2 A106 But should Work On All Other MediaTek Devices


Don't copy this thread (method) to any other blog or site & if you want to copy then add this original post link too


Next PostNewer Post Previous PostOlder Post Home

1 comment:

  1. How to repair dead mmx a110 no recovery mode sp flash tool not detected pc show usb not not recognise plzzzz give me solution

    ReplyDelete

Your Feedback Is important For Us